NITROGEN CONTROLLERS N2IT® XL
Principal : Bauer Compressors Inc
Downloads
Video
The N2IT® XL is a complete GIT process control system. The system includes an integrated nitrogen generator, high-pressure compressor, gas storage, and process control unit in a single mobile package. With only compressed air and electrical power required, N2IT® XL will control the gas assist process on any injection molding machine, eliminating the need for purchased nitrogen. N2IT® XL is loaded with user-friendly features and maintains accurate and repeatable processing with its precision pressure control system. Get N2 gas assist with N2IT® XL today!
SYSTEM FOOTPRINT
DIMENSIONS L X W X H inches (mm)
- 24.5 x 24 x 55 (52 x 60 x 140 )
WEIGHT pounds (kg)
- 176.37 (80)
COST OF OWNERSHIP
Like all BAUER compressors and controllers, the system is designed for long periods between maintenance intervals and has a very low cost of ownership.
- Lifetime BAUER support
STANDARD SCOPE OF SUPPLY
A state-of-the-art control system with True Track Ramping and an intuitive interface allows for simple operation.
The N2IT® XL includes EUROMAP 62 interface, and can easily be connected with any injection molding machine in your facility.
- Real-time accurate diagnostics
- Remote interface via smartphone option
- On-screen manual and maintenance instructions
- Three Stage, air cooled, reciprocating Compressor
- Lubricated crankcase
- 230v 60hz, Single phase (220v 50hz, 3 phase available)
- High durability membrane air separators
- Electric motor (ODP) with belt drive
- Pre membrane filters (particulate, moisture, and hydrocarbons)
- On/Off switch
- Automatic condensate collector with high condensate level switch
- Compressor high-temperature switch
- UL® labeled Control panel with PLC controller. Master central system includes interactive touchscreen interface for operation, maintenance, and troubleshooting
- 7” Siemens touch screen (SD card upgradable)
- Single point power supply connection
- Nitrogen purity monitoring
- Integrated storage vessel
- Multiple pressure sensors including: supply pressure, compressor inlet pressure, and process pressure
- Emergency stop push button
- Light tower for alarm annunciation
- 15’ power cord
- Ambient temperature range 40° F to 113° F
TECHNICAL DATA
| Model | Nitrogen Flow at 98.0% Purity | Feed Air Required at: 101.5 PSIG (7 BAR) | Motor | |||
|---|---|---|---|---|---|---|
| SCFM | M3/HR | SCFM | M3/HR | HP | KW | |
| 5000 PSIG (414 BAR) | ||||||
| N2IT XL | 5 | 8.5 | 25 | 42.5 | 5 | 3.7 |
- Capacity (FGD) is referenced to standard conditions. Tolerance +/- 5%.
- Purity reflects the content of 02-free gas produced. Dimensions and weight are approximate.
Volume flow rate is according to ISO 1217 with the following standard conditions: Inlet air pressure = sea level, 14.5 psig (1 bar) Inlet air temperature = 68° F (20° C) Relative Water Vapor Pressure = 0 Contact BAUER for site conditions that are other than standard. Correction factors may apply that may derate performance.
