Tyre Recycling

A complete ZERMA tire recycling system consists of 5 main components

  • The ZXS Pre-shredder shreds the complete tires down to a size of around 150 mm
  • The ZTTS Intermediate shredder cuts the tires down to a size of <20mm
  • Pieces of steel wire are separated from the rubber in this step of the process
  • In the GSH Granulator the tires are ground down to a size of approximately 4 mm
  • Depending on the required throughput a two stage system might be used
  • Throughout the process, separation equipment is used to remove metal and fibers to ensure a high quality result