HDPE KRM Black - For Extrusion Pipes and Blow Moulding Pipes

HDPE KRM 100

High Density Polyethylene
HDPE KRM 100 is a high density polyethylene compound (Black) produced by the ultimate Koremplast technology. Antioxidants and processing stabilizers are added, for good oxidation resistance and high mechanical properties. Carbon black gives outstanding UV resistance.

Application: Extrusion (pipes not in pressure)

Informative Tensile properties in accordance to EN ISO 527

  • Tensile strain at break (%) 700 - 950 Informative
  • Tensile strength at Yeld (Mpa) 22 - 28 Informative
  • Tensile strength at break (Mpa) 24 - 30 Informative
  • Tensile Modulus (Mpa) 800 - 1200 Informative
PROPERTY METHOD UNIT RANGE NOTE
M.F.I.(5 Kg) ISO 1133 g/10 min 0.40-0.70 guaranteed
Density ISO 1183 g/cm3 0.955-0.965 guaranteed
Carbon Black ISO 6964 % 2.00-2.50 guaranteed
O.I.T. EN 728 min. >20 guaranteed

HDPE KRM 95

High Density Polyethylene
HDPE KRM 95 is a high density polyethylene compound (Black) produced by the ultimate Koremplast technology. Antioxidants and processing stabilizers are added, for good oxidation resistance and high mechanical properties. Carbon black gives outstanding UV resistance.

Application: Extrusion (pipes not in pressure)

Informative Tensile properties in accordance to EN ISO 527

  • Tensile strain at break (%) 650 - 950 Informative
  • Tensile strength at Yeld (Mpa) 21 - 26 Informative
  • Tensile strength at break (Mpa) 23 - 28 Informative
  • Tensile Modulus (Mpa) 800 - 1150 Informative
PROPERTY METHOD UNIT RANGE NOTE
M.F.I.(5 Kg) ISO 1133 g/10 min 0.40-0.70 guaranteed
Density ISO 1183 g/cm3 0.955-0.965 guaranteed
Carbon Black ISO 6964 % 2.00-2.50 guaranteed
O.I.T. EN 728 min. >20 guaranteed

HDPE KRM 90

High Density Polyethylene
HDPE KRM 90 is a high density polyethylene compound (Black) produced by the ultimate Koremplast technology. Antioxidants and processing stabilizers are added, for good oxidation resistance and high mechanical properties. Carbon black gives outstanding UV resistance.

Application: Extrusion (pipes not in pressure)

Informative Tensile properties in accordance to EN ISO 527

  • Tensile strain at break (%) 650 - 950 Informative
  • Tensile strength at Yeld (Mpa) 20 - 25 Informative
  • Tensile strength at break (Mpa) 22 - 28 Informative
  • Tensile Modulus (Mpa) 800 - 1100 Informative
PROPERTY METHOD UNIT RANGE NOTE
M.F.I.(5 Kg) ISO 1133 g/10 min 0.35-0.75 guaranteed
Density ISO 1183 g/cm3 0.952-0.965 guaranteed
Carbon Black ISO 6964 % 2.00-2.50 guaranteed
O.I.T. EN 728 min. >20 guaranteed

HDPE KRM 80

High Density Polyethylene
HDPE KRM 80 is a high density polyethylene compound (Black) produced by the ultimate Koremplast technology. Carbon black gives outstanding UV resistance.

Application: Extrusion (pipes not in pressure)

Informative Tensile properties in accordance to EN ISO 527

  • Tensile strain at break (%) 650 - 950 Informative
  • Tensile strength at Yeld (Mpa) 20 - 25 Informative
  • Tensile strength at break (Mpa) 22 - 28 Informative
  • Tensile Modulus (Mpa) 800 - 1100 Informative
PROPERTY METHOD UNIT RANGE NOTE
M.F.I.(5 Kg) ISO 1133 g/10 min 0.35-0.75 guaranteed
Density ISO 1183 g/cm3 0.952-0.965 guaranteed
Carbon Black ISO 6964 % 2.00-2.50 guaranteed

HDPE KRM 60

High Density Polyethylene
HDPE KRM 60 is a high density polyethylene compound (Black) produced by the ultimate Koremplast technology. Carbon black gives outstanding UV resistance.

Application: Extrusion/Blow Moulding (pipes not in pressure)

PROPERTY METHOD UNIT RANGE NOTE
M.F.I.(2.16 Kg) ISO 1133 g/10 min 0.20-0.45 guaranteed
Density ISO 1183 g/cm3 0.955-0.972 guaranteed
Carbon Black ISO 6964 % 2.00-3.00 guaranteed