|
 |
SNG SERIES II NITROGEN GENERATOR - TECHNICAL DATA
| MODEL |
PRODUCT
FLOW @ NITROGEN PURITY (F.G.D., in SCFM/l/min) |
WORKING
PRESSURE (BAR) |
DIMENSION LWH(mm) |
| 99.5% |
99.0% |
98.0% |
| SNGll20410 |
8.0/225 |
11.0/310 |
16.5/460 |
350 |
2490x1625x1855mm |
| SNGll30415 |
13.0/360 |
18.0/500 |
26.0/730 |
350 |
2490x1625x1855mm |
| SNGll40815 |
25.0/700 |
26.0/730 |
27.0/760 |
350 |
2490x1625x1855mm |
SNG SERIES II
| NITROGEN
GENERATOR - STANDARD FEATURES: |
| • |
Bauer Continuous-duty
rated, air cooled rotary-screw feed air compressor with pneumatic
modulation control |
| • |
Bauer continuous-duty
rated, air cooled multi-stage reciprocating booster compressor |
| • |
Electric motor
drive with ODP-type motor, v-belt drive with tensioning device,
and guarding (feed air and booster) |
| • |
Proprietary PLC-based
control system with UL listed electrical panel |
| • |
High durability
air separation membranes (maximum 8) |
| • |
Feed air treatment filtration (includes coalescing and pre-coalescing separators and preheaters) |
| • |
In-line percent
oxygen monitor for continuous monitoring of product gas purity |
| • |
Modular design
allows for various configurations based on output pressure
and capacity |
| • |
Sound attenuating
enclosure for both feed air and booster compressors |
| • |
Common system skid, forkliftable, with 4 OSHA-approved machines levelling feet and storage space for common maintenance items. |
| • |
Light tower for system operating condition: |
| |
• |
GREEN: System
powered, not running |
| • |
YELLOW (solid): System running |
| • |
YELLOW (flashing): Maintenance
required |
| • |
RED: System stopped; fault
exists |
| • |
Interactive, operator-friendly
touch screen interface that controls or monitors: |
| |
• |
OFF/ON switch |
| • |
Power indicator light |
| • |
Product gas output pressure
setpoint |
| • |
Percent oxygen (O2) content |
| • |
Membrane inlet temperature |
| • |
Compressor hourmeter (feed
air and booster) |
| • |
Automatic condensate drain
(ACD) cycle counter |
| • |
Overrun timer setpoint |
| • |
All fault conditions |
| • |
Preventative maintenance intervals |
GI - range 90 - 350 bar / 1300
- 5000 psig - TECHNICAL DATA
| MODEL
DESIGNATION |
FREE
GAS DELIVERY |
NUMBERS OF COMPR.STAGES |
SPEED |
MOTOR POWER |
POWER
CONSUMTION** |
NET
WEIGHT APPROX. |
|
l/min |
cfm |
|
rpm. |
kW |
kW |
kg |
| GI
120 - 5.5 - 5 |
215 |
7,6 |
3 |
1470 |
5,5 |
4,7 |
355 |
| GI
12.14 - 7.5 -5 |
300 |
10,6 |
4 |
1390 |
7,5 |
6,5 |
365 |
| GI
15.1 - 11 - 5 |
420 |
14,8 |
4 |
320 |
11 |
9,6 |
450 |
| GI
150 -11 - 5 |
500 |
17,7 |
4 |
1230 |
11 |
10.2 |
450 |
| GI
180 - 15 - 5 |
610 |
21,6 |
4 |
1320 |
15 |
12 |
470 |
Dimensions in mm: 1480 x 830
x 1515
| MODELDESIGNATION |
INTAKE
PRESSURE
RANGE |
FREE
GAS
DELIVERY RANGE* |
SPEED |
POWER
CONSUMPTIONRANGE |
| |
bar
abs |
l/min |
cfm |
rpm |
kw |
| G13
12.2 - 5,5 - 5 |
6
- 12 |
200
-475 |
7,1
-16,8 |
1230 |
ca.
3.3 - 5.3 |
| G13
15.3 - 11 - 5 |
8
- 11 |
510
-750 |
18
- 26,5 |
1140 |
ca.
6.6 - 8.2 |
GI COMPRESSORS
| HIGH
PRESSURE COMPRESSOR SYSTEMS FOR NITROGEN
- STANDARD FEATURES: |
| • |
Removable side-doors
(Super Silent Unit) for easy maintenance access to any partition.
The compressor width is only 760mm without side panels. |
| • |
Compressor block mounted on
swing frame, vibration-free (shock absorbers). The whole
unit is mounted on a solid base plate, which allows easy
transportation by forklift. |
| • |
Forced Feed Lubrication (Oil
Pump), for the longest lifetime of all moving parts, i.e.
pistons, cylinders, crankshaft, etc. |
| • |
All connections at rear side
of the unit; Gas Intake and High Pressure Outlet. |
| • |
The new Standard B-CONTROL,
incl. panel with key pad. For the indication of operation-status
and mode, setup parameters, maintenance survey, faults (error
protocol)., |
| • |
Easy Auto-Start-Stop Operation
for a steady supply of a High Pressure N2 Storage Bank, controlled
by the B-CONTROL. |
|
| << Back |
| |
|
